Microsoft Toolkit Windows 7 Professional 64 Bit

The links that contain the windows 7 64 bit ISO are no longer valid to download. Where may I obtain a copy of the ISO. I have current product keys, and the 32 bit ISO, but not the 64 bit ISO. I mean one needs to make sure that Windows 7 Professional OEM 64 bit software from Microsoft and sold by Amazon.com will work on the buyer's PC. It takes a little time and effort but will save the buyer a whole lot of aggravation and headaches in the long run. Windows 7 Professional Product Key ( 64 bit ). Note: If these keys don’t work, you can use Microsoft Toolkit to active Windows Professional. Download Windows 7 Disc Images (ISO Files) If you need to install or reinstall Windows 7 you can use this page to download a disc image (ISO file) to create your own installation media using either a USB flash drive or a DVD.

Microsoft toolkit windows 7 professional 64 bit iso

Notes:

  • Support for Windows 7 ended on January 14, 2020

  • We recommend you move to a Windows 10 PC to continue to receive security updates from Microsoft.

The recommended (and easiest) way to get SP1 is to turn on automatic updating in Windows Update in Control Panel and wait for Windows 7 to notify you that SP1 is ready to install. It takes about 30 minutes to install, and you'll need to restart your computer about halfway through the installation.

To check if Windows 7 SP1 is already installed on your PC, select the Start button, right-click Computer, and then select Properties.
If Service Pack 1 is listed under Windows edition, SP1 is already installed on your PC.

Before you begin

Check if your PC is 32-bit or 64-bit

You’ll need to know if your PC is running a 32-bit (x86) or 64-bit (x64) version of Windows 7. Select the Start button, right-click Computer, and then select Properties. The version of Windows 7 is displayed next to System type.

Disk space requirements

Check to make sure your PC has enough free disk space to install SP1.

Installation method

Estimated amount of free disk space needed

Windows update

x86-based (32-bit): 750 MB

x64-based (64-bit): 1050 MB

Downloading SP1 from the Microsoft website

x86-based (32-bit): 4100 MB

x64-based (64-bit): 7400 MB

Back up important files

It’s a good idea to back up your important files, photos, and videos to an external hard disk, USB flash drive, or the cloud before installing the update.

Microsoft windows 7 pro 64

Plug in and connect to the Internet

Make sure your PC is plugged in to power and you’re connected to the Internet.

Disable antivirus software

Some antivirus software might prevent SP1 from installing or slow down the installation. You can temporarily disable your antivirus software before the installation. If you do so, make sure you’re aware of the risks that might be involved and re-enable the antivirus software as soon as SP1 is done installing.

Installing Windows 7 SP1 using Windows Update (recommended)

If your PC is set to automatically install updates, you’ll be prompted by Windows Update to install SP1. Follow the instructions to install the update.

To manually install SP1 from Windows Update:

  1. Select the Start button > All programs > Windows Update.

  2. In the left pane, select Check for updates.

  3. If any important updates are found, select the link to view available updates. In the list of updates, select Service Pack for Microsoft Windows (KB976932) and then select OK.

    Note: If SP1 isn’t listed, you might need to install some other updates before installing SP1. Install any important updates and then follow these steps again to check for SP1.

  4. Select Install updates. You might be asked for an admin password or to confirm your choice.

  5. Follow the instructions to install SP1.

  6. After SP1 is installed, sign in to your PC. You might see a notification indicating whether the update was successful. If you disabled your antivirus software before the installation, make sure you turn it back on.

Downloading and installing Windows SP1 from the Microsoft Download Center

If you’re unable to install SP1 from Windows Update, you can download the installation package from the Microsoft Download Center and then install SP1 manually.

  1. Go to the Windows 7 Service Pack 1 download page on the Microsoft website.

  2. Select Install Instructions to see which packages are available for download, and make note of the one that you need.

  3. Select the appropriate language from the drop-down list, and then select Download.

  4. Select the packages you need to install, select Next, and then follow the instructions to install SP1. Your PC might restart a few times during the installation.

  5. After SP1 is installed, sign in to your PC. You might see a notification indicating whether the update was successful. If you disabled your antivirus software before the installation, make sure you turn it back on.

Troubleshoot problems installing Windows SP1

If you try to install SP1 and see an error message that the installation wasn’t successful, this might be because there’s a problem with the Windows Servicing Store that is used to install updates or because your antivirus software is preventing the update from being installed.

To try and fix the problem, follow these steps and then try to install SP1 again.

Download and run the System Update Readiness Tool

  1. Select the link in the table that corresponds with the version of Windows running on your PC.

    Windows version

    Link to Microsoft Download Center

    Windows 7 32-bit (x86)

    Windows 7 64-bit (x64)

    On the Microsoft Download Center page, select your language and then select Download. It might take a few minutes for the tool to download and install.

  2. To install the tool immediately, select Open or Run and then follow the instructions. To use the tool later, select Save and download the installation files to your PC.

  3. On the Windows Update Standalone Installer screen, select Yes or OK.

  4. On the Installation complete screen, select Close.

  5. Try installing the service pack again.

Run the Windows Update troubleshooter

If your PC isn’t able to find or install updates, the Windows Update troubleshooter might be able to fix the problem.

Toolkit
  1. Select the Start button, and then select Control Panel.

  2. In the search box, enter troubleshooter and then select Troubleshooting from the list of results.

  3. Under System and Security, select Fix problems with Windows Update and then follow the instructions.

  4. After the troubleshooter is done, try installing the service pack again.

Windows 8.1 does not contain a trial-mode, now with the first start of the system requires activation, not just changing the wallpaper on your desktop with a signature at the bottom right type: “Windows 8.1 Pro Build 9600”, but also in an arbitrary time locks the screen with the requirement to activate that much annoying. Also in the non-activated version of Windows 8 is not available some useful personalization and other functions.

What is Microsoft Toolkit 2.6.5?

MS ToolKit — universal tool for managing licenses, modifications set of keys and activation of Microsoft’s products, which contains a number of activators and essential tools for managing licenses. MS ToolKit version above 2.5 supports offline (without being connected to the network) activation.

It should be noted a number of opportunities Utilities:

  • Activation of both the Office and the Windows.
  • Lifetime activation which crashes only in rare cases (such as the transfer of the system to other disks replacing components of the PC).
  • Support for various discharge systems 32 and 64 bits.
  • Backup licenses for the subsequent recovery (for example for the transfer of the official license to another device).
  • The system modules which helps to expand the program.

Unlike a number of questionable programs to activate this utility is safe, and outputs to the command line all the actions carried out. But Windows Defender and some anti-virus software can not afford to change a number of settings required for normal activation. Because at the time of activation to recommend them to temporarily disable.

For one-click quick and reliable activation there are compatible with activators utility: EZ-Activator or AutoKMS both of which are always available with the latest version of Microsoft Toolkit and have excellent activation algorithms.

Supported Products:

Supports all editions (Home, Pro, Enterprise) products such as: Windows Vista, Windows 7, Windows Server 2008, Windows 8, Windows 8.1, Windows Server 2012, Windows 10, Windows 10 Server.

As well as the assembly and individual editors versions of Microsoft Office data: 2003, 2007, 2010, 2013, 2016.

Instructions to activate Windows 8.1:

  • At the time of activation disableWindows Defender and antivirus (Click here to get info about how to turn off Windows Defender, if you need it).
  • Download the file, open it. Run executable file and you will download the archive with working Activator in it.
  • Run Microsoft Toolkit.exe as an administrator. If you will see blue screen in Windows 8 -> Click “More Info” -> “Run Anyway“.
  • Select the Windows icon (on the right), or of Office (left) next to settings.
  • Go to the tab “Activation“.
  • Click the “EZ-Activator” (highlighted in green).
  • Activation takes place automatically.
  • Enjoy your use!
Microsoft toolkit windows 7 professional 64 bit download

Videotutorial:

Microsoft Toolkit Windows 7 Professional 64 Bit Key

Screenshot of Windows 8.1 Professional activated: